Altronix NetWay8M Managed Midspans provide power and pass data for PoE compliant cameras/edge devices. Cameras/edge devices may be located up to 100m from the NetWay unit. A NetWayXT repeater module can be utilized to extend the distance an additional 100m for a total range of up to 200m. A maximum range of 600m is possible using multiple repeaters, based on camera/device port requirement. NetWay Managed Midspans are capable of supporting non-PoE compliant fixed and PTZ IP cameras utilizing NetWay1512 or NetWay3012 adapters.
$349.99 excluding tax
1 in stock
1 in stock
115VAC 60Hz, 3A.
Eight (8) ports of cameras/edge devices over ethernet (CAT5) cable up to a distance of 100m. per port.
Unit provides up to 30W max. full power per port.
Total power: 150W.
IEEE 802.3af (PoE) and IEEE 802.3at (PoE +) compliant.
Short circuit protection.
Programmable PoE shutdown for each port. Utilized to reset cameras/edge devices.
Auto detection and protection of legacy non-PoE cameras/edge devices.
LAN or laptop connection enables programming of PoE shutdown and port monitoring.
Illuminated master power disconnect circuit breaker with manual reset (switch).
Individual port status LEDs.
IEC 320 – 3-wire grounded line cord (detachable).
UL60950-1: – 20° C to 40° C ( – 4° F to 104° F).
UL294: – 20° C to 49° C ( – 4° F to 120.2° F).
– 20° to 70° C ( – 4° F to 158° F).
Relative Humidity 85% +/- 5%.
BTU/Hr. (approx.): 77 BTU/Hr.
System AC input VA requirement: 345VA.
– 304.8 to 2,000m.